Monday, October 27, 2014

Totally reset The Safety Code Of The Toyota Factory Stereo system

Toyota car stereos are equipped with an anti-theft feature that requires a four-digit access code. The feature is activated whenever the head unit is disconnected from the power source. After repairs or replacement, you will need to reset the access security code before operation of the stereo is possible. You can take the Toyota to an authorized Toyota dealership or service station to have the code reset, or you can do it yourself and save time.


Instructions


1. Turn the Toyota's ignition to the "On" position to provide power to the stereo.


2. Turn on the stereo head unit by pressing the power button located at the top-left corner of the stereo's face.


3. Press and hold the first preset button (marked with a "1") and the arrow up button on the left side of the stereo's face. Release the buttons once the series of dashes appear on the stereo's display.


4. Press the numbered preset button corresponding with the first number of the stereo code. For example, if the security code starts with "4," press the fourth preset button below the stereo display. Press the right arrow to move to the next digit in the code. Enter the remaining digits using the preset buttons. The radio will power off when the last correct digit is entered. Press the power button to use the stereo.


5. Repeat Steps 3 and 4 if the stereo does not accept the code you have entered. You have three chances to enter a correct code. After three unsuccessful attempts you will need to take your vehicle to a dealership or service station to have the stereo unlocked.